Call Us

02 9708 3233

Visit our Showroom

51 Birch St, Condell Park NSW

807 3-in-1 Flush Trim Bits for MDF/Laminate

3 in 1 new flush trim bits with Delrin® triangular bearings are your best partner for laminate trimming. In fact they solve 3 of the most common problems that occur in flush trimming in cabinet shops.

  1. The anti-stick properties of the Delrin® bearing greatly reduces the likelihood of freezing of the bearing from glue.
  2. The extended guide surface of the new Delrin® bearing will perfectly match the work surface without scratching like the steel bearing would. The Delrin® bearing also guarantees maximum stability.
  3. The shear angle cutting edge reduces the need for filing. 3 in 1 bits are ideal on plastic laminates as well as aluminium laminates!

3-in-1 bits are ideal on plastic laminates, as well as on aluminium laminates!


Additional Information

SKU D I L Code ¼’’
807.190.11 19 15.8 59 807.190.11

PATENT N. D628,218.
  • Extended guide surface.
  • Non-freezing.
  • Non-scratch surface.

Perfect trimming with the conical edges!

Thanks to the innovative conical edges of this bit you will always get perfect cuts even after re-sharpening. In fact, the most popular problem you have with the standard flush trim bits is the undersize diameter after re-sharpening which leaves the mark on the material; now with the new CMT construction you could re-sharpen up to six times without any problem. Just remember to adjust your bit up or down.



Related Products